Version 3.0 Build 2460 Enhancements 

Version 3.0 Build 2392 Enhancements & Bug Fixes 

• Force tachometer scale to appear linear. Previous versions would output a non-linear scale, with 0 - 1500 RPM occupying less space on the scale than the rest of the RPM range.
• Correct error in tachometer scale selection that prevented starting the scale at zero RPM. Previous programs could not select some combinations of scale start and end points starting at zero. The program will now adjust the end point higher if necessary to allow scales to start at zero.
• Do not display the __ FUEL QTY __ banner above fuel level gauge positions if no valid fuel level inputs exist.

Version 3.0 Build 2362 Enhancements & Bug Fixes 

• Fix bug in fuel units value conversion. Previous programs would not correctly convert from liters, pounds or kilograms to liters, pounds or kilograms (programs would correctly convert back to gallons, however).
• Only allow decimal values when entering fuel values in gallons. Previous programs would allow decimal values for liters, pounds and kilograms, and then truncate the value when storing to the EDM.
• Improve user feedback during pressure calibration. Previous programs would allow the user to attempt a second calibration before the first was complete.

Version 3.0 Build 2319 Enhancements & Bug Fixes 

• Remove AMPS calibration controls as they are no longer necessary for EDM calibration.

Version 3.0 Build 2305 Enhancements & Bug Fixes 

• Fix error that caused alarm levels modified on the Gauge Detail page to not be saved to the EDM if the user clicked the Finish button from the Gauge Detail page.
• Added support for 7, 8, & 9 cylinder configurations.

Version 3.0 Build 2271 Enhancements & Bug Fixes 

• Disable Auto Fuel Level Calibration for Voltage level sensors (not yet enabled in EDM firmware )
• Ensure that fuel gauge displays are updated if Low Tank Alarms are changed.

Version 3.0 Build 2270 Enhancements & Bug Fixes 

• Add pop-up message with valid range if an invalid fuel level reading is entered.
• Improved documentation of Hobbs time values.
• Display "Beta #" in EDM firmware version string if EDM contains test software. 
• Set high and low Fuel Pressure alarms correctly for FP3, FP4 and FP5 sensors.
• Fix error protecting gauge from changes when VOLTS is primary.
• Allow Auto Fuel Level Calibration for Capacitive level sensors with EDM 1.07.828 and above.
• Allow Auto Fuel Level Calibration for Voltage level sensors with EDM 1.07.829 and above.
• Add feature to print a one page description of the current configuration settings.  To print the configuration, use the Print Configuration command on the File menu.
• Display configuration key type (Primary, TSO or Experimental ) in program banner.

Version 3.0 Build 2257 Enhancements & Bug Fixes 

• Fix error displaying sidebar help on first run after program installation.
• Fix error reading FACTORY configuration and other read-only configuration files from disk.
• Ensure that EzConfig II properly formats fuel tables with fewer that 5 data points
• EzConfig II can now perform offline modification of saved configurations without first trying to open communications to the EDM.
• Removed default fuel table.  For safety reasons, the fuel table must be calibrated before Left and Right fuel level gauges will be shown.
• Add yellow "low voltage" warning band to Volts gauge defaults.
• Fix several problems initializing values on the Fuel Settings page
• Clear fuel table values when left or right fuel tanks are disabled.
• Fix EzConfig feature to read current EDM fuel level values.
• Change label for CRB/CDT channel when IAT enabled or disabled.

Version 3.0 Build 2245 Enhancements

• Minor changes to gauge defaults.

Previous changes

• Support for Primary Instrument installations.
• EzUpdate utility to allow users to easily update software from the Internet.   Users can now select the "Check for Online Updates" command on the "Help" menu to run a utility that will install available updates to EzConfig II.
• Improved Fuel Level Calibration page.
• Improved online Help.
• Move AMPS Shunt setting to Calibration page for EDM950 support.
• Add Low Fuel Level Alarm setting. 
• Add support for selection of 1 of 5 differnent fuel pressure sensors.
• Add code to prevent running more than one copy of EzConfig at a time, which could result in communications errors. 
• Enhance engine temperature conversion code to select multiples of 5 or 10 for engine temperatures scales and alarm limits, regardless of C or F scale selection.
• Added control to select number of entries in fuel configuration table.
• Improved support for JPI manufacturing processes. 
• Do not show primary gauges that are not enabled. 
• Coordinate low tank level alarms and fuel level gauges
• Automatically adjust Fuel Pressure alarm limit and gauge markings when switching between high and low pressure transducers.  This reduces the number of other user changes necessary when switching Fuel Pressure transducer types.
• Change Left and Right fuel tank level defaults to include a red, low tank level warning band from 0 to 5 gallons.
• Improved serial communications.
• Allow MAP maximums up to 99.9 In HG. for high performance engine applications.
• Allow MAP maximums up to 105 In HG. for diesel applications.
• Enhance Fuel Settings page to allow Forward/Aft tank configurations (Requires EDM930 software update to properly display "FORWARD" and "AFT" tank labels )
• Allow configuration of fuel pressure gauges using "low-pressure" sensors (FP1 & FP2 ) for maximum values up to 40 PSI.
• Allow configuration of Differential Fuel Flow for primary instruments.
• Add Minimize control to the Help window
• Enhance Fuel Settings page to make fuel tables more descriptive when using Resistive or Voltage fuel level sensing.
• Modify Voltage fuel level readings to have three decimal place precision.
• Allow user modification of non-primary settings on primary EDM instruments.
• Fix error that occurred when modifying EDM configurations offline.  Previous programs would output a message box stating "Changes have not been saved to EDM.  Discard changes?" even though the user is working offline.  This message will no longer appear when working offline.
• Fix error in Offline operations.  Previous programs would close EzConfig II the first time the user attempted to modify a configuration offline.  Subsequent attempts would work as expected, proceeding to the Aircraft Information page after opening a saved configuration file.  EzConfig II will no longer close on the initial attempt to work offline.
• Fix error in EDM com port detection feature that would occasionally cause "Framing Error" messages to be displayed on systems using more than one serial device.
• Fix error in gauge display when attempting to set AMPS gauge to Charge/Discharge mode.  Previous programs would not properly display the gauge when attempting to save the Gauge Detail changes.  The changes would only take effect after a second effort to change the AMPS gauge to Charge/Discharge mode.
• Fix error in Aux Tank size specification.  Previous programs would multiply the Aux Tank size by 5 on input, causing the value to grow each time the information is read from the EDM and later saved.
• Fix error that caused Arithmetic Overflow errors on some gauge option specifications.
• Ensure that the  Finish button saves changes to the current page.
• Fix error in communications while setting Hobbs values that resulted in incorrect Hobbs values loaded into EDM at factory.
• Fix error in communications while setting serial number of EDM at factory.
• Fix error in left and right tank size initialization that cause values of zero to be loaded into the fuel settings page.
• Fix error in configuration log naming.  The log name now correctly names files created after 12 noon.
• Fix error that caused EDM COM port to be closed during Reset EDM command, which prevented saving configuration changes after using the reset command. 
• Disable fuel related features not supported by older firmware.
• Fix error in Fuel Level gauge configuration that caused some minimum values to be incorrect.
• Disable 12 hour clock selection in GMT mode.
• Reset EDM before reading the current configuration to prevent saving "transient" data.
• Ensure that gauge display values are saved when converting engine temperatures from F to C or C to F.
• Correctly set alarm limits when converting between engine temperatures F to C or C to F.
• Correctly set primary caution limits when converting between engine temperatures F to C or C to F.
• Improve read reliability after automatic EDM reset.
• Ensure that fuel tank scales match tank sizes
• Ensure that fuel tank scale minimum is zero
• Ensure that Low Fuel Level alarms match fuel gauge "Red" markings.
• Fix error that causes gauge units labels to be incorrect when "Defaults" button is clicked.
• Enforce fuel pressure transducer limitations.  Previous programs could crash if user tried to set limits beyond rated pressures of fuel pressure transducer.
• Add AMPS Shunt value to primary keys. 
• Fix gauge and alarm configuration errors when configuring for systems with FP4 fuel pressure sensor.
• Fix gauge and alarm configuration errors when configuring for systems with FP2 fuel pressure sensor.
• Fix Primary Key data for automatic fuel level calibration.
• Fix Low Fuel Level alarms for automatic fuel level calibration.
• Fix error when reading fuel level tables.
• Fix default values for FP-5 Fuel Pressure gauge. 
• Fix "Number of Points" value on Fuel Settings page - previous programs could have an extra point.
• Correct error in FP alarm values for FP-3, FP-4, & FP-5 
• Correct cosmetic errors in Auto Fuel Level Calibration operation.
• Fix error that caused EDM930 to be identified as EDM900 on Expert configuration screen. 
• Add checks for invalid fuel table readings